How to Reset SOLE Treadmills | F80 Calibration Guide

Key Takeaways

• Resetting the SOLE F80 treadmill can resolve common issues like inaccurate speed or incline settings.
• Removing the safety key is the first step to accessing the factory settings.
• Use the "Start" and "Fast" buttons to navigate the factory settings menu.
• Calibration involves setting the wheel size diameter, minimum speed, maximum speed, and maximum elevation.

At SOLE Fitness, we're proud to offer the best treadmills for your home or gym. These machines are crafted to meet the highest standards of quality and performance, ensuring they are ideal for anyone - from fitness novices to seasoned athletes. Featured Product SOLE F80: Recognized for its high weight capacity and commercial-grade components, the F80 suits dedicated runners looking for a dependable treadmill with advanced features such as the 3.5HP motor.

Reasons to Reset and Calibrate F80 Treadmill

• Accuracy of Measurements: Calibration ensures that the speed and distance readings on the treadmill are accurate. If you find that your treadmill's readings do not match your actual performance, recalibrating can help correct this.
• Adjustment for Wear and Tear: Over time, components of the treadmill may wear down, affecting performance. Regular calibration can help maintain optimal functioning.

• Improvement of User Experience: If you feel that running on the treadmill is significantly easier or harder than running outdoors, calibration may help adjust the settings to better match your perceived effort.
• Correcting Incline Issues: If your treadmill displays a flat incline but feels like it has a slight incline, recalibrating may resolve this issue.

Resetting the SOLE F80 Treadmill

Removing Safety Key

• Locate the safety key on the console of the treadmill.
• Gently pull the key out and set it aside.
• This will stop the treadmill and bring it to a complete halt.

Accessing Factory Settings

To access the factory settings:

• Press and hold the "Start" button on the console.
• While holding the "Start" button, press the "Speed Up" button simultaneously and replace the safety key.
• Do this until the display changes to the factory settings menu.

Setting Metric or English

• Use the "Fast" and "Slow" buttons to toggle between metric (kilometers) and English (miles) units.
• Press the "Enter" button to confirm your selection.

Once you’ve set the units, you can proceed to adjust other settings like wheel size, speed, and elevation.

Wheel Size
Make sure the wheel diameter size is set to 2.36 so that you can get an accurate reading of distance covered and calories burned when exercising.

You can then press “Enter”.

Minimum Speed
Next, configure the minimum speed so the treadmill starts at a speed that is comfortable and safe for you. Here’s how you can set it:

• Use the "Fast" and "Slow" buttons to adjust the minimum speed.
• Typically, the minimum speed is set at 0.5 mph or 0.8 kph.
• Press "Enter" to confirm the setting.

Maximum Speed

• Again, use the "Fast" and "Slow" buttons to adjust the maximum speed.
• The maximum speed can be set up to 12 mph or 20 kph, depending on your preference.
• Press "Enter" to save the setting.

Maximum Elevation
The final setting to adjust before starting the calibration process is the maximum elevation. Follow these steps:

• Use the "Fast" and "Slow" buttons to set the maximum elevation level.
• The SOLE F80 treadmill allows for inclines up to 15 levels.
• Press "Enter" to confirm the elevation setting.

Starting Calibration Process

Once you've set the basic parameters, it's time to start the calibration process.

• Press and hold the "Start" button for several seconds.
• Wait for the treadmill to enter the calibration mode.
• Follow the on-screen instructions to complete the calibration.

This process happens automatically and the treadmill speed will start up on its own without any warning. Be sure not to stand on the treadmill during this time.

Safety Precautions

• Ensure the area around the treadmill is clear of any objects.
• Stand clear of the treadmill while it’s calibrating to avoid accidents.
• Keep children and pets away from the treadmill during the process.

Wrapping Up SOLE F80 Reset & Calibration

After the calibration process is complete, verify that all settings are correct and the treadmill is functioning properly. Here’s how you can do that:

• Check the speed and incline settings to ensure they match your inputs.
• Test the treadmill by running it at various speeds and inclines.
• Listen for any unusual noises that might indicate a problem.

Verification of Settings
Finally, restart the treadmill to complete the process.

• Turn off the treadmill and unplug it from the power source.
• Wait for a few minutes before plugging it back in.
• Turn on the treadmill and check the settings once more.

Do this to finalize the calibration process and so that your settings are saved.

Frequently Asked Questions (FAQ)

Why do I need to calibrate my SOLE treadmills?
Calibration is essential for several reasons:

• Ensures accurate speed and incline settings.
• Improves the overall performance and longevity of the treadmill.
• Helps in diagnosing and fixing any operational issues.
• Maintains the safety of the machine for all users.

Without proper calibration, you might experience inconsistencies in your workouts, which can affect your fitness progress.

How can I troubleshoot treadmill issues?
If you encounter any problems during the calibration process, here are some steps you can take:

• Ensure the treadmill is on a flat, stable surface.
• Check that all cables are securely connected.
• Refer to the user manual for specific error codes and their solutions.
• Contact SOLE Fitness customer support if the issue persists.

Do not attempt to disassemble the treadmill yourself, as this could void the warranty and cause further issues.

What is the frequency of treadmill calibration?

• Calibrate your treadmill every 6 months if you use it regularly.
• If you notice any inconsistencies in speed or incline, calibrate immediately.
• After any major maintenance or part replacement, recalibrate the machine.

How can I calibrate my SOLE F80 treadmill safely?

• Always remove the safety key before starting the process.
• Clear the area around the treadmill to prevent accidents.
• Stand clear of the treadmill while it’s calibrating.
• Keep children and pets away during the process.

How can I contact SOLE for further technical support?
If you run into any issues that you cannot resolve, don't hesitate to reach out for help. SOLE Fitness offers excellent customer support to assist you with any problems:

• Contact us via phone at 866-780-7653.
• Email our support team at info@soletreadmills.com.
• Visit our website for additional resources and FAQs.